BPZBV - FURNITURE POLISH-THICK CREAM, 152
- MSDS: BPZBV
- Manufacturer: CHEMICAL PACKAGING CORP
- Product Name: FURNITURE POLISH-THICK CREAM, 152
- National Stock Number: 7930-00N028115
Product Identification
Product ID:FURNITURE POLISH-THICK CREAM, 152
MSDS Date:11/14/1988
FSC:7930
NIIN:00N028115
MSDS Number: BPZBV
Responsible Party
POMPANO BEACH, FL 33069-4322
US
Emergency Phone: 305-974-5440
Info Phone: 305-974-5440
Cage: 57040
Contractor
Telephone: 305-974-5440
Cage: 57040
Ingredients
BENZIN; (VM&P NAPHTHA)
CAS: 8030-30-6
RTECS: DE3030000
OSHA PEL 300 PPM;400 PPM STEL
ACGIH TLV: 300 PPM
DOW CORNING 200 FLUID; (VM& P NAPTHA)
CAS: 63148-62-9
RTECS: JT6484500
OSHA PEL 300 PPM
ACGIH TLV: 300 PPM
PROPANE
CAS: 74-98-6
RTECS: TX2275000
OSHA PEL 1000 PPM
ACGIH TLV: SIMPLE ASPHYXIANTY 9
BUTANE
CAS: 106-97-8
RTECS: EJ4200000
OSHA PEL 800 PPM
ACGIH TLV: 800 PPM
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL: RESPIRATORY TRACT IRRIT, CNS
DEPRESSION, AND ANESTHESIA ARE POSSIBLE WITH VERY HIGH
CONCENTRATIONS. SKIN CONT/ABSORPTION: PROLONGED OR REPEATED CONTACT
CAN CAUSE MODERATE IRRITATION, DEFATTING AND DERMATITIS. INGEST:
CAN CAUSE GI IRRIT NAUS, VOMIT & DIARR. ASPIRATION OF MATL INTO
LUNGS CAN (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: CAUSE CHEMICAL PNEUMONITIS. EYES: CAN
CAUSE SEVERE IRRITATION, REDNESS, TEARING AND BLURRED VISION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYES: FUSH WITH WATER FOR AT LEAST 15 MIN, LIFTING LIDS. GET
MED ATN. SKIN: WASH EXPOSED AREAS WITH SOAP AND WATER. INHAL:
REMOVE TO FRESH AIR. IF BRTHG IS DFCLT, ADMINISTER O*2. IF BRTHG
STOPS GIVE A RTF RESP. GET MED ATTN. INGEST: DO NOT INDUCE VOMIT.
GET MED ATTN. ASPIRATION OF MATL INTO LUNGS DUE TO VOMIT CAN CAUSE
CHEMICAL PENUMONITIS.
Fire Fighting
Flash Point Method:TOC
Flash Point:NONE UP TO 150F
Extinguishing Media:FOAM, DRY CHEMICAL, CO*2.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . KEEP CONTAINERS COOL.
Unusual Fire/Explosion Hazard:AT ELEVATED TEMPERATURES (ABOVE 120F)
CONTAINERS MAY VENT, RUPTURE OR BURST.
Accidental Release
Spill Release Procedures:CLEAN UP AREA BY MOPPING OR WITH ABSORBENT
MATERIALS AND PLACE IN CLSOED CONTAINERS FOR DISPOSAL. CONTACT
FEDERAL, STATE OR LOCAL AUTHORITIES FOR APPROVED DISPOSAL
PROCEDURES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:DO NOT STORE @ TEMPERATURES ABOVE
120F.
Other Precautions:PLEASE READ AND FOLLOW DIRECTIONS ON PRODUCT LABEL.
THEY ARE YOUR BEST GUIDE TO USING PRODUCT IN THE MOST EFFECTIVE
WAY, AND THEY ALSO GIVE NECESSARY SAFETY PRECAUTIONS TO PROTECT
YOUR HEALTH.
Exposure Controls
Respiratory Protection:USE OF NIOSH/MSHA APPROVED RESPIRATORY
PROTECTION DEPENDS ON VAPOR CONCENTRATION ABOVE TLV: USE NIOSH/MSHA
APPROVED CARTRIDGE RESPIRATOR OR GAS MASK.
Ventilation:PROVIDE SUFFICIENT MECH(GEN) /OR LOC EXHAUST VENT TO
MAINTAIN EXPOS BELOW TLV(S).
Protective Gloves:NEOPRENE, NITRILE RUBBER OR (SUPP DATA)
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:DON'T EAT, DRINK OR SMOKE IN WORK AREA. WASH
HANDS BEFORE EATING.
Supplemental Safety and Health
PROT GLOVES: POLYVINYL CHLORIDE.
Chemical Properties
HCC:N1
Vapor Pres:53
Spec Gravity:0.920
Solubility in Water:EMULSIFIES
Appearance and Odor:WHITE VISCOUS LIQUID; LEMON PERFUME ODOR.
Percent Volatiles by Volume:>95
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG ACIDS OR BASES, SELECT AMINES.
Stability Condition to Avoid:DO NOT EXPOSE TO TEMPERATURES ABOVE 120F.
Hazardous Decomposition Products:THERMAL DECOMPOSITION IN THE PRESENCE
OF AIR MAY YIELD CO AND/OR CO*2.
Disposal
Waste Disposal Methods:WHEN USED PROPERLY, AEROSOL PROD DO NOT GENERATE
HAZ WASTE. EMPTY DE-PRESSURIZED CONTR CAN NOT BE REUSED & SHOULD BE
WRAPPED & PUT IN PERMITTED WASTE MANAGEMENT FACILITY. CONSULT
FEDERAL, STATE AND LO CAL DISPOSAL AUTHORITIES FOR APPROVED
PROCEDURES.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.